1. |
Disconnect the back up lamp switch connector (A).
|
2. |
Remove the back up lamp switch (A).
|
3. |
Replace a new one and install the back up lamp switch.
|
Disassembly
Engine removal is required for this procedure. (Refer to
Engine and transaxle assembly removal in this group)
1.
M/T : Remove the fly wheel.
2.
...
Parts
When replacing parts, use HYUNDAI genuine parts.
...
Installation
Installation is the reverse of removal.
Canister installation bolt/nut:
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...