Hyundai Accent Manuals

Hyundai Accent: Replacement - Fluid. Repair procedures - Hydraulic System - Automatic Transaxle SystemHyundai Accent: Replacement

ATF of 6 speed automatic transaxle doesn’t need to be replaced. If the vehicle is used severely in business or personal use, replace ATF every 60,000 miles.
Severe usage is defined as
•
Driving in rough road (Bumpy, Gravel, Snowy, Unpaved road, etc)
•
Driving in mountain road, ascent/descent
•
Repetition of short distance driving
•
More than 50% operation in heavy city traffic during hot weather above 32°C(89.6°F) .
•
Police, Taxi, Commercial type operation or trailer towing, etc
1.
Remove the drain plug (A) and reinstall the drain plug after draining ATF totally.


Drain plug tightening torque:
38.2 ~ 48.1 N.m (3.9 ~ 4.9 kgf.m, 28.2 ~ 35.4 lb-ft)

The gasket of the drain plug use new one.
2.
Fill the oil about 5 liters through eyebolt.
3.
Check the oil level.
(Refer to "Hydraulic system (Fluid)" in this group)

Service Adjustment Procedure
Oil level Check A check of ATF level is not normally required during scheduled services. If an oil leak is found, ...

Valve Body. Description and Operation
Description The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pr ...

See also:

Vehicle weight
This section will guide you in the proper loading of your vehicle, to keep your loaded vehicle weight within its design rating capability. Properly loading your vehicle will provide maximum return ...

Actual Measurement Dimensions ( 5Door )
Front side member tooling hole (Ø6.6) Side cover mounting hole (Ø8.6) Front sub frame m ...

Oil Pump. Description and Operation
Description The oil pump is built-in as a single unit with the 26 brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the tra ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com