Hyundai Accent Manuals

Hyundai Accent: Removal - Valve Body. Repair procedures - Hydraulic System - Automatic Transaxle SystemHyundai Accent: Removal

1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).

Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

3.
Replace new gasket and the plug after draining the automatic transaxle fluid by removing the drain plug. (Refer to "Hydraulic system (Fluid)" in this group)
4.
Remove the valve body cover (B).

Tightening torque:
13.7 ~ 15.7 N.m (1.4 ~ 1.6 kgf.m, 10.1 ~ 11.6 lb-ft)

5.
Remove thd air breather hose (A).
6.
Remove the plate and the detent spring (A) after removing the bolt.

Tightening torque:
11.8 ~ 15.7 N.m (1.2 ~ 1.6 kgf.m, 8.7 ~ 11.6 lb-ft)

7.
Remove the bolt (3ea) after disconnecting the solenoid valve (B) connector and the oil temperature sensor connector (A).

Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

8.
Remove the valve body assembly (A).

Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)


Valve Body. Repair procedures
...

Installation
1. Installation is the reverse of removal. • ...

See also:

Instrument panel illumination
When the vehicle’s parking lights or headlights are on, press the upper or lower part of the switch to adjust the brightness of the instrument panel illumination. ...

High mounted stop light bulb replacement
4 Door 1. Open the trunk lid. 2. Remove the socket by turning it counterclockwise. 3. Replace the bulb from the socket. 4. Install the socket by turning it clockwise. 5 Door If the light is ...

Repair procedures
Adjustment TCM Learning When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed. In the following case, TCM learnin ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com