Hyundai Accent: Transaxle Control Module (TCM). Description and Operation
Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Control Module (TCM). Description and Operation
Description
Transaxle Control Module (TCM) is the automatic transaxle's brain. The
module receives and processes signals from various sensors and implements a
wide range of transaxle controls to ensure optimal driving conditions for the
driver. TCM is programmed for optimal response to any on-road situation. In
the event of a transaxle failure or malfunction, TCM stores the fault information
in memory so that the technician may reference the code and quickly repair the
transaxle.
Functions
| • |
Monitors the vehicle's operating conditions to determine the optimal
gear setting.
|
| • |
Performs a gear change if the current gear setting differs from
the identified optimal gear setting.
|
| • |
Determines the need for damper clutch (D/C) activation and engages
the clutch accordingly.
|
| • |
Calculates the optimal line pressure level by constantly monitoring
the torque level and adjusts the pressure accordingly.
|
| • |
Diagnoses the automatic transaxle for faults and failures.
|
Components and Components Location
Components Location
[Vehicle Components]
1. Automatic transaxle
2. Transaxle control module (TCM)
3. Shift lever
4. (DLC)
[Transaxle Components ...
See also:
Repair procedures
Inspection
[System Inspection]
1.
Disconnect the vapor hose from the intake manifold
and connect a vacuum pump to the nipple on the intake manifold.
· At Col ...
Installation
•
Install the component with the specified
torques.
•
...
Removal
1.
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
2.
Remove the roof trim.
(Refer to ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com