Hyundai Accent: Inspection
| 1. |
Turn ignition switch OFF.
|
| 2. |
Disconnect the oil temperature sensor connector.
|
| 3. |
Measure resistance between sensor signal terminal and sensor ground
terminal.
|
| 4. |
Check that the resistance is within the specification.
|
Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group)
2.
Remove the under cover (A).
...
See also:
Injector. Specifications
Specification
Item
Specification
Coil Resistance (Ω)
1.5 [20°C(68°F)]
...
Installation
1.
Combustion seal
2.
Rubber washer
3.
Support disc
4.
O-ring
...
Components and Components Location
Component Location
1. Rear glass defogger relay (Interior junction box)
2. Rear glass defogger switch (A/C controller)
3. Rear glass defogger
...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com