1. |
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group)
|
2. |
Remove the under cover (A).
|
3. |
Replace new gasket and the plug after draining the automatic transaxle
fluid by removing the drain plug. (Refer to "Hydraulic system (Fluid)"
in this group)
|
4. |
Remove the air breather hose (A).
|
5. |
Remove the valve body cover (B).
|
6. |
Disconnect the oil temperature sensor connector (A).
|
7. |
Remove the oil temperature sensor (A) after removing a bolt.
|
Lift And Support Points
When heavy rear components such as suspension, fuel
tank, spare tire, tailgate and trunk lid are to be removed, place additiona ...
Interior A ( 4Door )
Front pillar trim mounting hole (Ø8.5)
Front pillar trim mounting hole (Ø8)
Cowl cross ...
Installation
1.
Installation is the reverse of removal.
•
...