Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraulic pressure
will need to be adjusted after replacing the VFS solenoid valve. If
replacing the VFS solenoid valve; also replace the valve body assembly.
(Refer to "Valve Body" in this group)
|
Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pulling the fuel
filler lid opener switch.
NOTICE
If the fuel filler lid will not open because ice has formed around it, tap
ligh ...
Installation
1.
Installation is the reverse of removal.
•
...
Components and Components Location
Component Location
1. Driver power window switch
2. Door lock switch
3. BCM (Body Control Module)
4. Front door lock actuator
5. Rear door lock actuator
6. I ...