1. |
Turn ignition switch OFF.
|
2. |
Disconnect the oil temperature sensor connector.
|
3. |
Measure resistance between sensor signal terminal and sensor ground
terminal.
|
4. |
Check that the resistance is within the specification.
|
Control System Composition
Fault Diagnosis
Features a fail-safe mechanism that prevents dangerous situations from
developing in the event of a transaxle failure. The limp home mode engages if
the transaxle mal ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the center fascia garnish
(A).
...
26 Brake Control Solenoid Valve(26/B_VFS). Description and Operation
Description
26 brake control solenoid valve(26/B_VFS) is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure
inside the 26 brake.
...