Hyundai Accent: Installation

Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / SS-B Solenoid Valve(ON/OFF). Repair procedures / Installation

1.

Installation is the reverse of removal.

•	The gasket of the valve body cover gasket (A) use new one.

•	Adding automatic transaxle fluid. (Refer to "Hydraulic system (Fluid)" in this group)

•	Perform TCM learning after replacing the automatic transaxle to prevent slow automatic transaxle response, jerky acceleration and jerky startup. (Refer to "Automatic transaxle control system (Repair procedures)" in this group)

Removal

Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraul ...

Inhibitor Switch. Description and Operation

Description Inhibitor Switch monitors the lever's position(PRND) and is used to control gear setting signals. ...

See also:

Passenger Airbag (PAB) Module. Description and Operation
Description The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB. ...

Component(1)
<Installation order : A→B→C→D> 1. Steering column shaft 2. Lighting switch 3. Wiper and washer switch 4. Screw 5. Clock spring ...

Emission control system
The emission control system of your vehicle is covered by a written limited warranty. Please see the warranty information contained in the Owner’s Handbook & Warranty Information booklet in ...

Hyundai Accent Manuals

© 2011-2024 Copyright www.hamanual.com