[Disc Type]
1. |
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
|
2. |
Remove the rear wheel and tire (A) from rear hub .
|
3. |
Remove the clip (A) and then remove the parking brake cable (B).
|
4. |
Remove the brake caliper mounting bolts, and then place the brake
caliper assembly (B) with wire.
|
5. |
Loosen the mounting screws and then brake disc (A).
|
6. |
Loosen the hub mounting bolt and then remove the hub (A) from
torsion beam axle.
|
7. |
Install in the reverse order of removal.
|
1. |
Remove the rear wheel & tire.
|
2. |
Loosen the screw (A) and then remove the disc (B).
|
3. |
Remove the spring (A, B, C).
|
4. |
Remove the shoe (A).
|
5. |
Disconnect the parking brake cable (A) from lining (B).
|
6. |
Remove the clip (A).
|
7. |
Remove the parking brake cable clip (A).
|
8. |
Loosen the wheel speed sensor cable (A) bolt &nut and parking
brake cable (B) mounting nut.
|
9. |
Remove the brake hose (A) and then loosen the cylinder bolt.
|
10. |
Loosen the hub mounting bolt and then remove the hub (A) from
the torsion beam.
|
11. |
Install in the reverse order of removal.
|
Removal
In case of removing the high pressure fuel pump,
high pressure fuel pipe, delivery pipe, and injector, there may be injury
...
Driver Airbag (DAB) Module and Clock
Spring. Components and Components Location
Components
1. Driver Airbag (DAB)
2. Steering Wheel
3. Clock Spring
...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the trunk trim.
(Refer to the BD group - " Trunk Lid")
...