1. |
Check the components for damage or deformation.
|
2. |
Compress and extend the piston rod (A) and check that there is
no abnormal resistance or unusual sound during operation.
|
3. |
If non smooth working or unusual sound during operation, must
be exchange the shock absorber.
|
1. |
Fully extend the piston rod.
|
2. |
Drill a hole on the (A) section to remove gas from the cylinder.
|
Installation
•
Do not turn the ignition switch ON and do not contact
the battery cable while replacing the ...
Input Speed Sensor. Specifications
Specifications
▷ Type: Hall effect sensor
Operation condition [°C(°F)]
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(1.2 ~ 1.8)
0.0472 ...
Impact sensing door unlock system
All doors will be automatically unlocked when the impact is delivered to impact
sensors while the ignition switch is ON. However, the doors may not be unlocked
if mechanical problems occur with th ...