If you turn the ignition switch to the OFF position with the tail lamps ON and the driver's door in an open position, the warning chime will sound.
To stop the chime, perform one of the following:
1) Turn the ignition key to the ON position.
2) Turn the tail lamps OFF.
3) Close the driver's door.
CAUTION
To prevent the battery from being discharged, make sure to turn off the lamp before getting out of the vehicle.
Repair procedures
Adjustment
TCM Learning
When shift shock is occurred or parts related with the transaxle are replaced,
TCM learning should be performed.
In the following case, TCM learnin ...
Measuring Body Dimensions
1.
Basically, all measurements in this manual are taken
with a tracking gauge.
2.
When a measuring tape is used, check to be sure there
...
Description and Operation
Description
Emissions Control System consists of three major systems.
•
The Crankcase Emission Control System prevents blow-by
gas from releasing into the atmosphere. T ...