Hyundai Accent Manuals

Hyundai Accent: Rear Torsion Beam Axle. Repair procedures - Rear Suspension System - Suspension SystemHyundai Accent: Rear Torsion Beam Axle. Repair procedures

Hyundai Accent RB (2010-2018) Service Manual / Suspension System / Rear Suspension System / Rear Torsion Beam Axle. Repair procedures

Replacement

[Disc Type]
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

Be careful not to damage to the hub bolts when removing the rear wheel & tire.
2.
Remove the clip (A) and then remove the parking brake cable (B).
3.
Remove the parking brake clip (A).
4.
Loosen the bolt & nut and then remove the parking brake cable (A) & wheel speed sensor cable (B) from the torsion beam axle.
5.
Remove the brake caliper assembly (B) from the torsion beam axle by loosening the bolts (A).
Tightening torque :
63.7 ~ 73.5N.m(6.5 ~ 7.5kgf.m, 47.0 ~ 54.2lb-ft)

6.
Loosen the bolt & nut and then remove the rear shock absorber (A) from the torsion beam axle (B).
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

7.
Remove the torsion axle (A) from the body loosening the bolts.
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

8.
Installation is the reverse of removal.
[Drum Type]
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

2.
Loosen the screw (A) and then remove the disc (B).
Tightening torque :
4.9 ~ 5.9N.m (0.5 ~ 0.6kgf.m, 3.6 ~ 4.3lb-ft)

3.
Remove the spring(A, B, C).
4.
Remove the shoe (A).
5.
Disconnect the parking brake cable (A) from lining (B).
6.
Remove the clip (A).
7.
Remove the parking brake cable clip (A).
8.
Loosen the wheel speed sensor cable (A) bolt &nut and parking brake cable (B) mounting nut.
9.
Remove the brake hose (A) and then loosen the cylinder bolt.
10.
Loosen the hub mounting bolt and then remove the hub (A) from the torsion beam (B).
Tightening torque :
49.0 ~ 58.8N.m (5.0 ~ 6.0kgf.m, 36.2 ~ 43.4lb-ft)

11.
Loosen the bolt & nut and then remove the rear shock absorber (A) from the torsion beam axle (B).
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

12.
Loosen the bolt and then remove the torsion beam axle (A) from the body.
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

13.
Install in the reverse order of removal.

Rear Torsion Beam Axle. Components and Components Location
Components 1. Rear torsion beam axle ...

Tires/Wheels
...

See also:

Driving off-road
Drive carefully off-road because your vehicle may be damaged by rocks or roots of trees. Become familiar with the off-road conditions where you are going to drive before you begin driving. ...

Rear window defroster
The defroster heats the window to remove frost, fog and thin ice from the rear window, while the engine is running. To activate the rear window defroster, press the rear window defroster button ...

Battery. Components and Components Location
Components 1. Battery insulation pad 2. Battery 3. Battery tray 4. Battery mounting bracket 5. ECM & bracket assembly ...

Hyundai Accent Manuals


В© 2011-2024 Copyright www.hamanual.com