When using a commercially available computerized wheel alignment
equipment to inspect the rear wheel alignment, always position the vehicle
on a level surface.
Prior to inspection, make sure that the rear suspension system
is in normal operating condition and that the tires are inflated to
the specified pressure.
|
B - A. 0: Toe in (+)
B - A < 0: Toe out (-)
|
Toe:
Total : 0.5° (+0.4°/ -0.5°)
Individual :0.25°(+0.2°/ -0.25°)
|
Camber : -1.5°±0.5°
|
Interior B ( 4Door )
Seatbelt height adjust upper mounting hole (Ø15)
Seatbelt height adjust lower mounting hole (Ø15)
...
ESC connector input/output
Connector Terminal
Specification
Remark
No
Description
29
IGNITION1(+)
High level of wake up ...
Sunroof. Components and Components
Location
Components
1. Sunroof frame assembly
2. Motor assembly
3. Glass assembly
4. Guide assembly
5. Drip rail assembly
6. Drip link
7. Sunshade assembly
8. Defle ...