Hub Nut Tightening Sequence
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
|
When using an impact gun, final tightening torque should be checked
using a torque wrench.
|
Seat Heater Switch. Schematic Diagrams
Schematic Diagram
...
Anchor Pretensioner (APT). Components and Components Location
Components
...
TPMS Receiver. Repair
procedures
Replacement
1.
Disconnect the battery negative cable from the battery.
2.
Remove faulty part and fit bracket assembly to new part.
...