Hyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Suspension System / Tires/Wheels / Tire. Repair procedures / Removal

1.	Remove valve core and deflate the tire.

2.

Remove the side of the tire bead area from the wheel using tire changing machine .

•	The tire bead should be broken approx. 90° from the valve side of the wheel. The bead breaker should not be set too deep.

•	Avoid tire/tool contact with the valve on dismount.

•	Dismount should end near the valve.

3.	Rotate the wheel clockwise.

Tire Wear

1. Measure the tread depth of the tires. Tread depth [limit] : 1.6 mm (0.063 in) 2. If the rema ...

Installation

1. Apply tire soap or lubrication to the top and bottom tire beads. 2. To fit the bottom bead, position the valve at the 5 o’clock pos ...

See also:

Description and Operation
Description Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-programmed ...

Automatic transaxle operation
The automatic transaxle has 6 forward speeds and one reverse speed. The individual speeds are selected automatically, depending on the position of the shift lever. To move the shift lever from th ...

Tail lamp warning chime
If you turn the ignition switch to the OFF position with the tail lamps ON and the driver's door in an open position, the warning chime will sound. To stop the chime, perform one of the followi ...

Hyundai Accent Manuals

© 2011-2024 Copyright www.hamanual.com