Hyundai Accent: Replacement
| Repair tire after using the Tire Mobility Kit (TMK) |
When the TPMS warning lamp OFF
| 1. |
Remove the TMK repaired tire, wheel and TPMS sensor.
(Refer to "Tire removal")
|
| 2. |
Remove the sealant on the wheel and TPMS sensor (A) completely.
|
| 3. |
Install the TPMS sensor to the new tire.
|
| 4. |
Check that the normal operation of TPMS system.
|
When the TPMS warning lamp ON
| 1. |
Remove the TMK repaired tire, wheel and TPMS sensor.
(Refer to "Tire removal")
|
| 2. |
Remove the sealant on the wheel and TPMS sensor (A) completely.
|
| 3. |
Install the TPMS sensor to the new tire.
|
| 4. |
Check the tire pressure using the electrical tire pressure gauge.
|
| 5. |
Check the tire pressure of TPMS sensor using the GDS
|
| 6. |
If the difference between two checked pressures in the above is
not more than 2 psi, TPMS sensor is normal. Reinstall it to new tire.
|
| 7. |
If the difference between two checked pressures in the above is
more than 2 psi, TPMS sensor is abnormal. Install new TPMS sensor to
new tire.
|
| 8. |
Check that the normal operation of TPMS system.
|
Removal
Handle the sensor with care.
1.
Remove the tire. (Refer to "Tire Removal")
...
Installation
Sensor Fit
•
Handle the sensor with care.
•
...
See also:
Variable Intake Solenoid
(VIS) Valve. Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Removal and Installation
1.
Disconnect the battery terminals. (Refer to Engine
and transaxle assembly in this group)
2.
Remove the air cleaner assembly. (Refer to E ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com