Inspection
1. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
2. |
Measure the distance the steering wheel can be turned without
moving the front wheels.
|
3. |
If the play exceeds standard value, inspect the steering column,
shaft, and linkages.
|
1. |
Position the vehicle on a level surface and place the steering
wheel in the straight ahead position.
|
2. |
Start the engine and turn the steering wheel from lock to lock
several times to warm up the power steering fluid.
|
3. |
Attach a spring scale to the steering wheel. With the engine speed
900 ~ 1100rpm, pull the scale and read it as soon as the tires begin
to turn.
|
4. |
If the measured value exceeds standard value, inspect the power
steering gear box and MDPS system.
|
Replacement
Standard values, such as torques and certain adjustments,
must be strictly observed in the reassembly of all parts.
If removed, the following parts should always be replaced
with new ones ...
Side repeater light bulb replacement
Type A
1. Remove the light assembly from the vehicle by prying the lens and pulling
the assembly out.
2. Disconnect the bulb electrical connector.
3. Separate the socket and the lens parts by t ...
Tail lamp warning chime
If you turn the ignition switch to the OFF position with the tail lamps ON and
the driver's door in an open position, the warning chime will sound.
To stop the chime, perform one of the followi ...