1. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
2. |
Remove the door scuff trim.
(Refer to the Body group - "Interior trim")
|
3. |
Remove the center pillar trim.
(Refer to the Body group - "Interior trim")
|
4. |
Disconnect the side impact sensor connector (A).
|
5. |
Loosen the side impact sensor mounting bolt (B) and remove the
side impact sensor.
|
Seat Heater Switch. Schematic Diagrams
Schematic Diagram
...
Front Impact Sensor (FIS). Components and Components
Location
Components
...
Rear Drum Brake. Components and Components Location
Components
1. Shoe hold down pin
2. Shoe adjuster
3. Upper return spring
4. Adjusting lever
5. Shoe
6. Adjusting spring
7. Lower return spring
8. Sh ...