1. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
2. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
3. |
Remove the driver airbag module mounting bolts (2EA).
|
4. |
Remove the wiring fixing clip (C), and then release the connector
locking pin to disconnect the driver airbag module connector (B).
|
5. |
Remove the steering wheel and steering wheel column shroud. (Refer
to the Steering System group - "Steering Column and Shaft")
|
6. |
Disconnect the clock spring connector, then remove the clock spring.
|
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to the RT group - "DAB and Clock spring ...
Interior G ( 5Door )
Front pillar trim mounting hole (Ø8.5)
Front pillar trim mounting hole (Ø8)
Cowl cross ...
Removal
1.
Remove the rear wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...