Hyundai Accent: Removal
The side airbag cannot be disassembled from the seat back assembly,
so replace assembly when replacing the side airbag.
|
| 1. |
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
|
| 2. |
Remove the front seat assembly.
(Refer to the Body group - "Seat")
|
| 3. |
Remove the seat back assembly.
(Refer to the Body group - "Seat")
|
Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
...
See also:
Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
9.81 ~ 500.14
(0.1 ~ 5.5, 1.42 ~ 7.82)
...
Rear Shock Absorber. Components
and Components Location
Components
•
Must completely be tigtened at the curb position of vehicle
when assemble s ...
Specifications
Description
Specifications
Limit
General
Type
In-line, DOHC
Number of cylinders
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com