1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes.
|
3. |
Tighten the curtain airbag mounting bolts.
|
4. |
Connect the curtain airbag connector.
|
5. |
Install the roof trim.
(Refer to the Body group - "Interior")
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the curtain airbag (CAB), confirm proper system
operation:
|
Emergency Towing
There are three popular methods of towing a vehicle :
-
The operator loads the vehicle on the back of truck.
This is best way of transporting the vehicle.
...
System operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed contro ...
Inspection
1.
Check the signal waveform of the CMPS and CKPS using
the GDS.
Specification:
Refer to “Wave Form”
...