1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes.
|
3. |
Install the seat belt pretensioner with mounting bolts (B, C).
|
4. |
Connect the seat belt pretensioner (BPT) connector (A).
|
5. |
Install the upper anchor bolts.
|
6. |
Install the following parts.
(Refer to the Body group - "Interior trim")
|
7. |
Install the lower anchor bolts.
|
8. |
Reconnect the battery negative cable.
|
9. |
After installing the seat belt pretensioner, confirm proper system
operation:
|
Rear Torsion Beam Axle. Components
and Components Location
Components
1. Rear torsion beam axle
...
Repair procedures
Inspection
1.
After disconnecting the vapor hose from the PCV valve,
remove the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
...
If you have a flat tire (with tire mobility kit)
For safe operation, carefully read and follow the instructions in this manual
before use.
(1) Compressor
(2) Sealant bottle
The Tire Mobility Kit is a temporary fix to the tire and the tire sho ...