1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
3. |
Install the SRSCM with the SRSCM mounting nuts.
|
4. |
Connect the SRSCM harness connector.
|
5. |
Install the rear heating joint duct and floor console. (Refer
to the Body group - "Console")
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the SRSCM, confirm proper system operation:
|
Air bag - advanced supplemental restraint system
(1) Driver’s front air bag
(2) Passenger’s front air bag
(3) Side impact air bag
(4) Curtain air bag
WARNING
Even in vehicles with air bags, you and your passengers must always wear
the ...
Installation
1.
Installation is the reverse of removal.
...
Rear Body ( 4Door )
Roof panel rear corner
Side outer panel rear corner
Rear window opening frame notch
...