Hyundai Accent: Front Impact Sensor (FIS). Description and Operation

The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.

Variant coding

After replacing the SRSCM with a new one, must be performed the “Variant Coding” procedure. 1. On ...

Front Impact Sensor (FIS). Components and Components Location

Components ...

See also:

Inspection
Speed Operation Check 1. Remove the connector (A) from the wiper motor. 1. - 2. IGN+ 3. Parking 4. High 5. GND ...

SRS Control Module (SRSCM). Components and Components Location
Components ...

Yaw-rate and G Sensor. Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the front seat (LH) assembly. (Refer ...