|
1. |
Install the new front impact sensor.
|
2. |
Tighten the front impact sensor mounting bolt.
|
3. |
Connect the front impact sensor connector.
|
4. |
Install the washer reservoir.
(Refer to the Body Electrical group - "Washer motor")
[Right side only]
|
5. |
Install the front bumper.
(Refer to the Body group - "Front bumper")
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the Front Impact Sensor, confirm proper system
operation:
|
Description
Automatic transaxle system relies on various measurement data to determine
the current control status and extrapolate the necessary compensation values.
These values are used to control the a ...
Specifications
Specifications
Items
Specifications
Rated voltage
DC 12V
Operating temperature range
-30°C ~ +80°C (-22 ~ +17 ...
Engine compartment
1. Engine coolant reservoir
2. Windshield washer fluid reservoir
3. Radiator cap
4. Engine oil filler cap
5. Engine oil dipstick
6. Brake/clutch fluid reservoir
7. Air cleaner
8. Fuse box
9. ...