1. |
After loosening the hinge (A) mounting bolt, adjust the hood (B)
by moving it up or down, or right or left.
|
2. |
Adjust the hood height by turning the hood over slam bumpers (C).
|
3. |
After loosening the hood latch (D) mounting bolts, adjust the
latch by moving it up or down, or right or left.
|
Adjustment
How To Initialize Motor
1.
Check that the glass has been installed.
A.
Finished height adjustment.
2.
...
Side Body C ( 5Door )
Front side member tooling hole (Ø12)
Fender apron upper reinforcement
tooling hole (Ø7)
...
Relay Box (Engine Compartment). Repair procedures
Inspection
Power Relay Test (Type A)
-
Do not use pliers.
-
...