Hyundai Accent: Automatic Transaxle System

Replacement

1. Disconnect the back up lamp switch connector (A). 2. Remove the back up lamp switch (A). 3. ...

General Information

...

See also:

Inspection
Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch. Wiper Switch Washer Switch ...

Installation
Side Impact Sensor • Do not turn the ignition switch ON and do not connect the battery c ...

Wheel. Repair procedures
Hub Nut Tightening Sequence Tighten the hub nuts as follows. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...