Hyundai Accent: BCM (Body Control Module)

Transmitter Code Registration (Using GDS)

1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. ...

Body Control Module (BCM). Specifications

Specifications Item Requirement Remark Rated voltage DC 12V Shall activate normally in these range. Operat ...

See also:

Removal
1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Turn the steering wheel so that the ...

Transmitter Code Registration (Using GDS)
1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. ...

Installation
Side Impact Sensor • Do not turn the ignition switch ON and do not connect the battery c ...