Specifications
Item |
Requirement |
Remark |
Rated voltage |
DC 12V |
Shall activate normally in these range. |
Operating voltage range |
DC 9 ~ 16V |
|
Operating temperature range |
-30°C ~ +75°C (-22°F ~ +167°F) |
|
Storage temperature range |
-40°C ~ +85°C (-40°F ~ +185°F) |
|
Max humidity in use |
95% |
|
High voltage resistance |
24V |
|
Insulation resistance |
100MΩ or more (measured with 500V MEGGER) |
Specify as well as parts that insulation like PCB, moisture-proof
COATING is required |
Dark Current |
Max 4mA |
Measure when the state, all output loads are OFF and there are no
Input SW(including TX operation) changes, continues 2sec. |
Voltage drop |
1.2V or less |
Output terminals for POWER WINDOW RELAY shall be 2.0V or less |
NO |
System name |
Capacity |
1 |
Room lamp |
DC 12V 20W(Lamp load) |
2 |
Power door relay |
DC 12V 200mA(Inductive load) |
3 |
Hazard relay |
DC 12V 200mA(Inductive load) |
4 |
Door lock relay |
DC 12V 200mA(Inductive load) |
5 |
Door unlock relay |
DC 12V 200mA(Inductive load) |
6 |
Driver door unlock relay |
DC 12V 200mA(Inductive load) |
7 |
Tail lamp relay |
DC 12V 200mA(Inductive load) |
8 |
Horn relay |
DC 12V 200mA(Inductive load) |
9 |
Interior autocut |
DC 12V 200mA(Inductive load) |
Removal
•
Do not spill brake fluid on the vehicle;
it may damage the paint if brake fluid does contac ...
Removing and storing the spare tire
Turn the tire hold-down wing bolt counterclockwise.
Store the tire in the reverse order of removal.
To prevent the spare tire and tools from “rattling” while the vehicle is in motion,
store ...
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature sensor connector.
3.
Measure resistance between ...