Hyundai Accent: Body (Interior and Exterior)
Steering Angle Sensor. Description and OperationInspection
1.
Immerse the thermostat in water and gradually heat
the water.
2.
Check the valve opening temperature.
...
ECM Problem Inspection Procedure
1.
TEST ECM GROUND CIRCUIT: Measure resistance between
ECM and chassis ground using the backside of ECM harness connector as
ECM side check point. If the problem is fo ...
Replacement
The injector combustion seal should be replaced new one to
prevent leakage after removing the injector.
1.
Remove the combustion seal (A) with a wire cutter.
...