Hyundai Accent: Brake Booster Operating Test
Hyundai Accent RB (2010-2018) Service Manual / Brake System / Brake System / Brake Booster. Repair procedures / Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following
tests.
| 1. |
Run the engine for one or two minutes, and then stop it. If the
pedal depresses fully the first time but gradually becomes higher when
depressed succeeding times, the booster is operating properly, if the
pedal height remains unchanged, the booster is inoperative.
|
| 2. |
With the engine stopped, step on the brake pedal several times.
Then step on the brake pedal and start the engine. If the pedal
moves downward slightly, the booster is in good condition. If there
is no change, the booster is inoperative.
|
| 3. |
With the engine running, step on the brake pedal and then stop
the engine.
Hold the pedal depressed for 30 seconds. If the pedal height does
not change, the booster is in good condition, if the pedal rises, the
booster is inoperative.
If the above three tests are okay, the booster performance can
be determined as good.
Even if one of the above three tests is not okay, check the check
valve, vacuum hose and booster for malfunction.
|
Removal
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical group - "Battery")
...
See also:
Knock Sensor (KS). Description
and Operation
Description
Knocking is a phenomenon characterized by undesirable vibration
and noise and can cause engine damage. Knock Sensor (KS) is installed on the
cylinder block and senses engine knoc ...
Canister Close Valve (CCV). Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Inspection
Speed Operation Check
1.
Remove the connector (A) from the wiper motor.
1. -
2. IGN+
3. Parking
4. High
5. GND
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com