0. Speed restriction label
1. Sealant bottle and label with speed restriction
2. Filling hose from sealant bottle to wheel
3. Connectors and cable for the power outlet direct connection
4. Holder for the sealant bottle
5. Compressor
6. On/off switch
7. Pressure gauge for displaying the tire inflation pressure
8. Screw cap for reducing tire inflation pressure
9. Hose to connect compressor and sealant bottle or compressor and wheel
Connectors, cable and connection hose are stored in the compressor housing.
WARNING - Expired sealant
Do not use the Tire sealant after the sealant has expired (i.e. pasted the expiration date on the sealant container). This can increase the risk of tire failure.
WARNING - Sealant
Strictly follow the specified sequence, otherwise the sealant may escape under high pressure.
Engine Mounting. Components and Components Location
Components
1. Transaxle mounting bracket
2. Rear roll stopper
3. Engine mounting bracket
4. Engine mounting support bracket
...
Components Operations
PCM (Power Train Control Module)
1.
The PCM (ECM) (A) carries out a check of the ignition key using
a special encryption algorithm, which is programmed into the transp ...
Camshaft Position Sensor
(CMPS). Troubleshooting
Wave Form
...