Replacement
1. |
Remove the wiper arm cap (B) and remove the nuts, then remove
wiper arm (A).
|
2. |
Remove the washer hose (B).
|
3. |
Detach the clips, then remove the cowl top cover (A).
|
4. |
Installation is the reverse of removal.
|
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the CVVT oil control valve connector (A).
...
Removal
1.
Release the residual pressure in fuel line (Refer
to “Release Residual Pressure in Fuel Line” in this group).
2.
Remove the rear sea ...
Clutch Release Cylinder. Components and Components
Location
Components
1. Union bolt
2. Gasket
3. Tube joint
4. Clutch tube
5. Valve plate
6. Valve spring
7. Bleeder screw
8. Release cylinder
9. Return sprin ...