Description
Never attempt to measure the circuit resistance of the airbag
module even if you are using the specified tester. If the circuit resistance
is measured with a tester, accidental airbag deployment will result
in serious personal injury.
|
Inspection
1.
Check each part for cracks, damage or wear, and replace
the coolant pump assembly if necessary.
2.
Check the bearing for damage, abnorma ...
Installation
1.
Installation is the reverse of removal.
•
...
Installation
1.
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve
upward.
2.
Install the water inlet fitting ( ...