Hyundai Accent: Description
The Electronic Throttle Control (ETC) System consists of
a throttle body with an integrated control motor and throttle position sensor
(TPS). Instead of the traditional throttle cable, an Accelerator Position Sensor
(APS) is used to receive driver input. The ECM uses the APS signal to calculate
the target throttle angle; the position of the throttle is then adjusted via
ECM control of the ETC motor. The TPS signal is used to provide feedback regarding
throttle position to the ECM. Using ETC, precise control over throttle position
is possible; the need for external cruise control modules/cables is eliminated.
|
1. Dry bearing 2. DC motor 3. Non-contact hall sensor 4. Gear |
5. Magnet 6. Hall IC 7. Yoke 8. Stator |
See also:
Output Speed Sensor. Troubleshooting
Signal Waveform
Fig 1) Input/Output speed sensor at low speed
Fig 2) Input/Output speed sensor at high speed
...
Removal
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical group - "Battery")
...
Engine Coolant Temperature
Sensor (ECTS). Description and Operation
Description
Engine Coolant Temperature Sensor (ECTS) is located in the
engine coolant passage of the cylinder head for detecting the engine coolant
temperature. The ECTS uses a thermistor th ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com