Hyundai Accent: Description and Operation

Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-programmed in the memory of the ECM (Engine Control Module).

The engine operating conditions (speed, load, warm-up condition, etc.) are detected by the various sensors. Based on these sensor signals and the ignition timing data, signals to interrupt the primary current are sent to the ECM. The ignition coil is activated, and timing is controlled.

Ignition System

...

Repair procedures

On-vehicle Inspection Spark Test 1. Disconnect the connectors (A) and then ignition coils (B). 2. Disconnect ...

See also:

Adjustment
1. After loosening the tail gate hinge (A) mounting bolt, adjust the tail gate by moving it up or down, or right or left. 2. Adjust the tai ...

Steering wheel audio control
The steering wheel audio control button is installed to promote safe driving. CAUTION Do not operate audio remote control buttons simultaneously. VOLUME (VOL +/-) (1) Press the up button (+) ...

Identification Number Description. Vehicle Identification Number
1. World Manufacturer Identifier (WMI) - KMF : Commercial vehicle (Van) - KMH : Passenger vehicle or MPV(Multipurpose Passenger Vehicle)/SUV(Sports Util ...