Hyundai Accent: Description and Operation

The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil filter and gets distributed along the oil channels. The oil becomes highly pressurized as it exits the oil pump and passes through the line pressure valve before being fed to the clutch & brake control valve, clutch, and brakes. TCM controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.

Hydraulic System

...

Components and Components Location

Components Location 1. Automatic transaxle 2. Valve body assembly 3. Oil pump assembly ...

See also:

Crash Pad. Components and Components Location
Components 1. Main crash pad assembly 2. Side airvent duct [RH] 3. Side airvent duct [LH] 4. Cluster assembly 5. Cluster facia panel 6. Heater control unit 7. ...

Heated Oxygen Sensor (HO2S). Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...

To resume cruising speed at more than approximately 25 mph (40 km/h)
If any method other than the cruise ON/OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when the RES+ switch is ...