Hyundai Accent Manuals

Hyundai Accent: Disassembly - Cylinder Head. Repair procedures - Cylinder Head Assembly - Engine Mechanical SystemHyundai Accent: Disassembly

Hyundai Accent RB (2010-2018) Service Manual / Engine Mechanical System / Cylinder Head Assembly / Cylinder Head. Repair procedures / Disassembly

Identify MLA(Mechanical lash adjuster), valves, valve springs as they are removed so that each item can be reinstalled in its original position.
1.
Remove the MLAs (A).
When removing MLAs, mark all the MLAs for their rearrangement.

2.
Remove the valves.
(1)
Using the SST (09222 - 3K000, 09222 - 3K100), compress the valve spring and remove the retainer lock.
(2)
Remove the spring retainer.
(3)
Remove the valve spring.
(4)
Remove the valve.
(5)
Remove the valve stem seal.
(6)
Using a magnetic pickup tool, remove the spring seat.
Do not reuse the valve stem seals.

Removal
Engine removal is not required for this procedure. • Use fender covers to avoid damaging painted ...

Inspection
Cylinder Head 1. Inspect for flatness. Using a precision straight edge and feeler gauge, measure the surface the contacting the cylinder block and the ...

See also:

Changing the engine oil and filter
Have engine oil and filter changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this section. CALIFORNIA PROPOSITION 65 WARNING Engine oil contains c ...

ESC OFF Switch. Description and Operation
Description 1. The ESC OFF switch is for the user to turn off the ESC system. 2. The ESC OFF lamp is on when ESC OFF switch is engaged. ...

Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraul ...

Hyundai Accent Manuals


В© 2011-2024 Copyright www.hamanual.com