Hyundai Accent: Disassembly
| 1. |
Remove the rear cover (A).
|
| 2. |
Loosen the mounting bolts(A) and disconnect the brush
holder assembly(B).
|
| 3. |
Remove the slip ring guide(A).
|
| 4. |
Remove the pulley(A) using the special tool.
|
| 5. |
Unsolder the 3 stator leads(A).
|
| 6. |
Loosen the 4 through bolts(A).
|
| 7. |
Disconnect the rotor(A) and bracket(B).
|
| 8. |
Reassembly is the reverse order of disassembly.
|
Removal and Installation
1.
Disconnect the battery negative terminal first, then
the positive terminal.
Tightening torque
(-) terminal :
4.0 ~ 6. ...
Inspection
Rotor
1.
Check that there is continuity between the slip rings
(C).
2.
Check that there is no continuity between the s ...
See also:
Component(1)
<Installation order : A→B→C→D>
1. Steering column shaft
2. Lighting switch
3. Wiper and washer switch
4. Screw
5. Clock spring
...
SS-B Solenoid Valve(ON/OFF). Schematic Diagrams
Circuit Diagram
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com