Hyundai Accent: Disassembly
Key lock assembly
| 1. |
Make a groove on the head of special bolts (A) by a punch.
|
| 2. |
Loosen the special bolt using a screw driver and then remove the
key lock assembly from the steering column assembly.
|
| 3. |
Reassembly is the reverse of the disassembly.
|
Universal joint assembly
| 1. |
Loosen the bolt (A) and then disconnect the universal joint assembly
from the steering column assembly.
|
| 2. |
Reassembly is the reverse of the disassembly.
|
Replacement
1.
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
2.
Turn the steering wheel so that the fro ...
Inspection
1.
Check the steering column for damage and deformation.
2.
Check the steering column for damage and deformation.
3.
...
See also:
Inspection
1.
Check the components for damage or deformation.
2.
Compress and extend the piston rod (A) and check that there is
no abnormal resistance ...
Starting the engine
WARNING
Always wear appropriate shoes when operating your vehicle. Unsuitable shoes
(high heels, slippers, ski boots, etc.) may interfere with your ability to use the
brake, accelerator pedal, a ...
Purge Control Solenoid
Valve (PCSV). Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com