Hyundai Accent: Disassembly and Reassembly
Hyundai Accent RB (2010-2018) Service Manual / Suspension System / Front Suspension System / Front Strut Assembly. Repair
procedures / Disassembly and Reassembly
| 1. |
Compress the coil spring with a strut spring compressor. Do not
compress the spring more than necessary.
|
| 2. |
Loosen the lock nut.
|
| 3. |
Disassemble the components of front strut assembly in sequence.
(Refer to Front strut assembly components)
|
| 4. |
Reassembly is the reverse of disassembly.
|
Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Inspection
1.
Check the components for damage or deformation.
2.
Compress and extend the piston rod (A) and check that there is
no abnormal resistance ...
See also:
PODS-F Zeroing procedure
You should perform PODS-F Re-zero procedure after service or replacement
about all part of the passenger seat. (Not included full seat assembly)
1.
Ignition “OFF” ...
Brake Line. Components and Components Location
Components
...
Installation
•
Install the component with the specified
torques.
•
...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com