Hyundai Accent: Emission Control System

Starter Relay. Repair procedures

Inspection 1. Remove the fuse box cover. 2. Remove the starter relay(A). 3. Using an ohmmeter, check t ...

General Information

...

See also:

Installation
1. Place the thermostat in the block. Install the thermostat (B) with the jiggle valve upward. 2. Install the water inlet fitting ( ...

Disassembly
1. Disconnect the M-terminal (A) on the magnet switchassembly. 2. After loosening the 2 screws (A), detach the magnetswitch assembl ...

Removal
1. Turn ignition switch OFF. 2. Pull up the lock of the HECU connector (A), and then disconnect the connector. ...