Hyundai Accent: ETC (Electronic Throttle
Control) System. Troubleshooting
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / ETC (Electronic Throttle
Control) System. Troubleshooting
Fail-Safe Mode
|
Item |
Fail-Safe |
|
|
ETC Motor |
Throttle valve stuck at 7° |
|
|
TPS |
TPS 1 fault |
ECM looks at TPS2 |
|
TPS 2 fault |
ECM looks at TPS1 |
|
|
TPS 1,2 fault |
Throttle valve stuck at 7° |
|
|
APS |
APS 1 fault |
ECM looks at APS 2 |
|
APS 2 fault |
ECM looks at APS 1 |
|
|
APS 1,2 fault |
Engine idle state |
|
When throttle value is stuck at 7°, engine speed
is limited at below 1,500rpm and vehicle speed at maximum 40 ~ 50 km/h
(25 ~ 31 mph)
|
ETC (Electronic Throttle
Control) System. Specifications
Specification
[Throttle Position Sensor (TPS)]
Throttle angle(°)
Output Voltage (V)
TPS1
TPS2
0
0.5
4.5
...
See also:
Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
...
Tire chains
Tire chains, if necessary, should be installed on the front wheels.
Be sure that the chains are installed in accordance with the manufacturer's instructions.
To minimize tire and chain wear, do ...
Control System Composition
Fault Diagnosis
Features a fail-safe mechanism that prevents dangerous situations from
developing in the event of a transaxle failure. The limp home mode engages if
the transaxle mal ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com