Replacement
|
1. |
Remove the front bumper cover.
(Refer to the BD group – “Front bumper”)
|
2. |
Loosen the mud guard mounting screws.
|
3. |
After loosening the mounting screws, then remove the front bumper
side mounting bracket (A).
|
4. |
Using a screwdriver or remover, remove the fender side cover (B).
|
5. |
After loosening the mounting bolts and nut, then remove the fender
(A).
|
6. |
Installation is the reverse of removal.
|
Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are
cold. “Cold Tires” means the vehicle has not been driven for at least three hours
or driven less than one mile (1. ...
Repair procedures
Inspection
Front Door Lock Actuator
1.
Remove the front door trim.
(Refer to the Body group - Front door)
2.
Remove the front door ...