Hyundai Accent: Front fog light
Fog lights are used to provide improved visibility when visibility is poor due to fog, rain or snow etc. The fog lights will turn on when fog light switch (1) is turned to ON after the headlights are turned on. To turn off the fog lights, turn the switch to OFF.
CAUTION
When in operation, the fog lights consume large amounts of vehicle electrical power. Only use the fog lights when visibility is poor or unnecessary battery and generator drain could occur.
Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). Green arrow indicators on the instrument
panel indicate which turn si ...
Wipers and washers
A :Wiper speed control
· MIST – Single wipe
· OFF – Off
· INT – Intermittent wipe
· LO – Low wiper speed
· HI – High wiper speed
B : Intermittent wipe time adjustment
C :Wash w ...
See also:
Installation
1.
Install the heater & air conditioning controller.
2.
Install the audio unit.
3.
Connect the battery (-) ...
Variable Intake Solenoid
(VIS) Valve. Description and Operation
Description
Variable Intake manifold Solenoid (VIS) valve is installed
on the intake manifold. The VIS valve controls the vacuum modulator which activates
a valve in the intake manifold. The ...
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
NOTICE
Not all fuse panel descriptions in this manual may be applicable to your ve ...
Hyundai Accent Manuals
