Hyundai Accent Manuals

Hyundai Accent: Front Impact Sensor (FIS). Description and 
Operation - SRSCM - Restraint (Depowered)Hyundai Accent: Front Impact Sensor (FIS). Description and Operation

Hyundai Accent RB (2010-2018) Service Manual / Restraint (Depowered) / SRSCM / Front Impact Sensor (FIS). Description and Operation

Description

The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.

Variant coding
After replacing the SRSCM with a new one, must be performed the “Variant Coding” procedure. 1. On ...

Front Impact Sensor (FIS). Components and Components Location
Components ...

See also:

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds. (Refer to the ST group - & ...

Fuses
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 fuse panels, one located in the driver’s side panel bolster, the other in the engine ...

Adjustment
Glass Adjustment • Check the glass run channel for damage or deterioration, and replace ...

Hyundai Accent Manuals


© 2011-2025 Copyright www.hamanual.com