Hyundai Accent: Fuel Filter. Repair procedures
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Filter. Repair procedures
Replacement
| 1. |
Remove the fuel pump (Refer to “Fuel Pump” in this
group).
|
| 2. |
Disconnect the electric pump wiring connector (A)
and the fuel sender connector (B).
|
| 3. |
Remove the head assembly (A) after releasing the
cushion fixing clip (B).
|
| 4. |
Disconnect the fuel tube quick-connectors (C).
|
| 5. |
Remove the fuel sender (A) in the direction of an
arrow.
|
| 6. |
Disconnect the fuel tube connector (A).
|
| 7. |
Remove the cut valve (A) after releasing hooks (B).
|
| 8. |
Remove the reservior-cup (B) after releasing the
fixing hooks (A).
|
| 9. |
Release the fixing hooks, and then remove the pre-filter
(A) and the fuel pressure regulator (B).
|
| 10. |
Replace new fuel filter.
1. Head Assembly
2. Electric Pump Motor
3. Fuel Filter
4. Fuel Sender
5. Fuel Pressure Regulator
6. Pre-filter
7. Reservoir cup
|
Inspection
[Fuel pump]
1.
Turn ignition switch OFF and disconnect the negative
(-)battery cable.
2.
Remove the fuel pump assembly.
...
See also:
Disassembly
Key lock assembly
1.
Make a groove on the head of special bolts (A) by a punch.
2.
Loosen the special bolt using a screw driver an ...
Output Speed Sensor. Specifications
Specifications
▷ Type: Hall effect sensor
Operation condition [°C(°F)]
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(0.85 ~ 1.3)
0.033 ...
Replacement
Trunk Lid Assembly Replacement
•
When removing and installing the trunk lid, an assistant
...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com