Inspection
1. |
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
|
2. |
Disconnect the fuel pressure regulator valve connector.
|
3. |
Measure resistance between the fuel pressure regulator
valve terminals 1 and 2.
|
4. |
Check that the resistance is within the specification.
|
Passenger and Rear Power Window Switch
...
Intake Air Temperature
Sensor (IATS). Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Checking the tire inflation pressure
1.After driving approximately 4~6miles (7~10km or about 10min), stop at a safety
location.
2.Connect connection hose (9) of the compressor directly to the tire valve.
3.Plug the compressor power c ...