The support rod must be inserted into the hole near
the edge of the hood whenever you inspect the engine compartment to
prevent the hood from falling and causing possible injury.
Make sure that the support rod has been released
prior to closing the hood. Always check to be sure the hood is firmly
latched before driving the vehicle.
|
Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are
cold. “Cold Tires” means the vehicle has not been driven for at least three hours
or driven less than one mile (1. ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and
various engine speed.
...
Battery. Description and Operation
Description
1.
The maintenance-free battery is, as the name implies,
totally maintenance free and has no removable battery cell caps.
2.
W ...